Robe Robin CycBar UV, Руководство пользователя

Страница: 16 / 25

Robin CycBar UV
16
4. Press the ENTER button. The selected program runs in a loop.
Edit --- Editing a program . The fixture offers a freely editable program up to 40 steps.
Use the UP/DOWN buttons to find “ St.AL. “ menu and press the ENTER button.
1. Use the UP/DOWN buttons to select “ Edit “ menu and press the ENTER button.
2. Use the UP/DOWN buttons to select a desired program step ("St.01" - "St.40") and press ENTER button.
3. Use the UP/DOWN buttons to select a channel you want to edit and press the ENTER button.
List of editable items:
“P.End” - a total number of the program steps (value 1-40). This value should be set before start
Programming (e.g. if you want to create program with 10 steps, set P.End=10).
“Stro.” – a strobe
“dinr” – a dimmer coarse
“F. din” – a dimmer fine
“F.tin.” – a fade time
“S.tin.” –- a step time
“COPY“. – this item duplicates the current prog. step to the next prog. step.
4. Use the UP/DOWN buttons to set a DMX value of the channel and then press the ENTER button.
5. Use the UP/DOWN buttons to select next channel and press the ENTER button.
6. After having set all channels in the current program step, press the ESCAPE button to go by one menu level
back and select another program step.
6.7 Special functions
rdML --- Code .This menu item shows the first part of the RDM identification code.
rdMH --- Code . This menu item shows the second part of the RDM identification code.
rAdI --- SiGn
- t
he menu serves for reading of the state of wireless operation (only Wireless DMX).
unLi
- t
he item serves for unlinking the fixture from the transmitter (only Wireless DMX version)
HOLd --- If the function is on, the last received DMX values are held in case that DMX data receiving was
interrupted (e.g. disconnected DMX controller).
uPd.M. --- Updating mode . The menu item allows you to update software in the fixture.
The following items are required in order to update software:
- PC running Windows or Linux or macOS
- DSU file
- Flash cable RS232/DMX, P/N13050624 (if you want to use a serial port of PC)
- Robe Universal Interface or Robe Universal interface WTX (if you want to use an USB port of PC)
Note: Software update should be executed by a qualified person. If you lack qualification, do not attempt the
update yourself and ask for help your Anolis distributor.
After the software updating the fixture will be set to default (factory) values.
To update software in the fixture:
1. DSU file is available from the Anolis web site at WWW.anolis.cz.
File with extension zip is intended for Windows (used and tested from XP to W10 on 32/64bit systems).
File with extension tbz is intended for Linux (used and tested on Debian and Ubuntu 32/64bit).
File with extension dmg is intended for macOS (used and tested on OSX up to Sierra) XQuartz required,
install it from https://www.xquartz.org/
Save the download file to a folder on your computer.