Robin CycBar 12
8
3.4 Inserting diffuser
Design of the Robin CycBar 12 allows inserting diffuser in front of the glass cover in order to change a beam angle
of the fixture. Each diffuser consist of two parts. Always insert both parts of diffuser into fixture.
To insert diffuser:
1. Disconnect the fixture from mains and allow it to cool.
2. Press and hold a diffuser lock (1) and insert the first part of the diffuser (2). Release the diffuser lock.
3. Press and the hold diffuser lock (1) on the opposite side of the Robin CycBar 12 and insert the second part of
the diffuser (2). Release the diffuser lock.
4. Check that both diffusers are inserted properly and cannot slide out from the fixture.
4. Wireless DMX operation
The wireless version of the CycBar 12 is equipped with the Lumen Radio CRMX module and antenna for receiving
DMX signal. CRMX module operates on the 2.4 GHz band.
1.
Select option Wireless DMX input from the menu
PErS
(PErS-->dM.In.--> VirL.).
2.
To link the fixture with DMX transmitter.
The fixture can be only linked with the transmitter by running the link procedure at DMX transmitter .
After linking , the level of DMX signal ( 0-100 %) is displayed in the menu
item “
SPEC
“ (SPEC-->ViFi.)
3.
To unlink the fixture from DMX transmitter.
The fixture can be unlinked from receiver via the menu item “
SPEC
“ (SPEC-->ViFi-->UnLi.)
Содержание Robin CycBar 12
Страница 1: ...Version 1 0 ...
