Robin CycBar 12
21
VhI.c.
---
White counting.
If this function is on, the white LED of each pixel lights when a white colour is mixed.
The light intensity of the white LED is in a proportion to the intensity of the rest of pixel´s LEDs (red, Green, blue)
and improves the white output of the pixel. The function influences “pixel modes” only - DMX mode 3 and 4
(RGBW colour mixing mode has to be set).
tnP.u.
---
Temperature unit.
Use this menu in order to display the fixture temperatures in desired units: °C or °F.
In.Po.
---
Init effect positions.
Use this function to set all effects to the desired positions to which they will move
after switching the fixture on (if DMX is not receiving).
dF.SE.
---
Default Settings .
The menu item sets all fixture parameters to the default (factory) values.
7.4 Manual mode
Use this menu to control all channels via buttons of the control board.
Items in this menu depend on selected DMX mode.
To control fixture channels.
1.
Use the UP/DOWN buttons to find “ Man.C“ menu.
2.
Press the ENTER button.
3.
Use the UP/DOWN buttons to select desired effect (channel).
List of control channels:
“Func.” –
a Special functions channel
“rEd.A” – a red LEDs saturation coarse
“rE.A.F” – a red LEDs saturation fine
“GrE.A” – a green LEDs saturation coarse
“Gr.A.F” – a green LEDs saturation fine
“bLU.A” – a blue LEDs saturation coarse
“bL.A.F” – a blue LEDs saturation fine
“VhI.A” – a white LEDs saturation coarse
“Vh.A.F” – a white LEDs saturation fine
“Cto” – a colour temperature correction
“Vir.C.” – a virtual colour wheel
“PiH.E.” – pixel effects
“PH.E.S.” – a pixel effects speed
“Stro.“ - a strobe/shutter
“dinr“ - a coarse dimmer
“F.dim” a fine dimmer
“rEd.I” a red LED 1
:
“bL.12” a blue LED 12
4.
Press the ENTER button and use the UP/DOWN buttons to set value , press the ENTER button to confirm it.
Содержание Robin CycBar 12
Страница 1: ...Version 1 0 ...
