Robe Robin BMFL FollowSpot, Руководство пользователя

Страница: 23 / 52

23
After switching the fixture on, the touch screen shows the screen with the ROBE logo:
Note: The green icon at the top right corner of the screen indicates the level of the display battery charging. If
the whole icon is green, the battery is fully charged while the red icon indicates exhausted battery. The battery
charges during fixture operation, its charging lasts cca 6 hours.
We recommend that the fixture should be in operation at least 7 hours per week to keep the battery fully charged.
If you switch the fixture on and this screen will not appear till 1 minute, switch the fixture off and on again. If the
screen lights, the battery is exhausted. In case the screen still does not light, the battery is faulty.
This is also indicated by an error message "Faulty battery" and if such an error message appears the battery
should be replaced immediately. The lifetime of the battery is highly dependent on ambient temperature (and
consequently on base temperature). If the maximum ambient temperatures (as recorded and displayed in menu:
Information -> Fixture Temperatures -> Ambient Temperature -> Maximum NonRes.) are kept within the spec -
ified limits, the battery should last for at least two years. Shell the ambient temperatures exceed the specified
maximum temperature, the lifetime of the batteries could be considerably shortened even up to just one year
or less and also result in physical damage (battery leakage) or unreliable fixture functions.
Damage caused by batteries failed due to exceeded maximum ambient temperature cannot be claimed under
warranty terms.
Touch any part of the screen or press the [ENTER/Display On] button to display the initial screen with the current
stored DMX address (and the end address for selected DMX mode):
Touch the green arrow at the bottom right corner of the screen or press the [ENTER/Display On] button to enter
the " Address" menu.
An item (such as a Tab, menu item, text box, icon) may be selected from a screen by simply touching the item.
Before first fixture operation, set current date and time in the menu "Date &Time Set -
tings" (menu path: Personality--> Date &Time Settings).
7.1 Tab " Address"
DMX Address - Select the menu to set the DMX start address
.
DMX Preset - Use the menu to select desired channel mode.
Mode 1 - 33 control channels
Mode 2 - 27 control channels
View Selected Preset - Use the menu to display channels included in the selected mode.
Ethernet Settings
-
The menu allows all needed settings for the Ethernet operation
Ethernet Mode