11
Tilt reverse
This function allows you to invert the tilt movement. Use the [ Up ] and [ Down ] keys to select "On" if you wish
this feature or "Off" if you don’t wish this feature and press [ Menu ] to confirm and return to the main menu.
Test program
This function allows you to run a special test program without an external controller, which show you some
possibilities of using DJ SCAN 150 XT. Press the [ Menu ] key to run the test program, the "tSt" will start to flash.
Reset Function
Press [Menu] key to run reset. This option enables the DJ SCAN 150 XT to index all effects (functions) and
return to their standard positions.
7.2. Special functions - calibration
Run a test program, "tSt" must flashing. Press [ Up ] and [ Down ] keys together and hold them until the display
will show message "C08" meaning the calibration value of the colour wheel. Use [ Up ] and [Down ] keys to adjust
a new calibration value from range "C00 - C15", the wheel moves in microsteps, so you can easilly center current
colour.
Press [ Menu ], on the display will appear message "G08", meaning the calibration value of the gobo wheel.
Use [ Up ] and [Down ] keys to adjust a new calibration value from range "G00 - G15", the wheel also moves in
microsteps, so you can easilly center current gobo. Now press [Menu ] in order to go back to colour calibration
(display shows current colour calibration value) or press and hold [ Menu ] key until the display will show "tSt" in
order to finish calibration procedure.
8.Technical specifications
Power supply:
EU version -Voltage......................208,230 ,240 V AC, 50/60 Hz ~
-Fuse..........................T 2,5 A@ 230V
US version -Voltage......................100,120,208,230 ,240 V AC, 50/60 Hz ~
-Fuse..........................T 5 A@ 120V
-Power consumption.....250VA
Lamps:
BLV HIT150nw ,150W,G12 or Osram HSD 150/70 ,G12
Optical System:
- High reflecting aluminium-coated parabolic reflector
- Manual focus
- Standard 19° beam angle
Beampath:
Содержание DJ SCAN 150 XT
Страница 1: ......
