Robe DigitalSpot 5000 DT, Руководство пользователя

Страница: 78 / 111

DigitalSpot 5000 DT
78
Control PC (light console)
Type the IP address of the DigitalSpot 5000 DT which is to project data from a remote streaming video source in
your WWW browser to run the Remote Control program.
Select the option "Remote Content" and the following window will open:
Type in the "source Address" field the IP address and the port number of the streaming source (in our case it is a
PC) in this format: http://2.x.x.x:port number e.g. http://2.1.1.3:1234 and save it by clicking the "Update" button.
This way defined streaming source is assigned to a DMX value of 1 at the channel
Gobo selection .
You can define another videos from the same streaming source - the IP addresses will be the same for all videos
only the port numbers have to be different.
After specifying all streaming sources close the "Remote Content" window.
To run a video processing on the fixture
On The DigitalSpot 5000 DT which is to project video data from a streaming video source, set the channel
Gobo
folder selection
at value of 252 and on the following channel "Gobo selection" set a DMX value which responds to
the streaming video source defined in the "Remote Content" window. The streaming video processing starts
running with a delay of cca 10 seconds.
Example for gobo/video layer 1:
Channel Value Function Type of control
23/24/49
0-20
21-240
241-250
251
252
253-255
Gobo Folder selection
Factory folders
User folders
Reserved
Live input (grab. card)-see channel 24/25/50
Streaming from remote source
Reserved
step
step
step
step
24/25/50
0
1 - 255
0
1-20
:
Gobo selection
White
255 Gobos/videos (one by one)
If Live input (251 DMX) is selected on channel 23/24/49:
White screen
Video composite input-PAL system
:
step
step
step
step
: