22
23
9.4 Personality
Use this menu to to modify ColorWash 575 AT operating behavior.
r.PAn
---
Pan reverse
.Select this function to invert the pan movement.
r.tilt
---
Tilt reverse
.Select this function to invert the tilt movement.
DM.Pr.
---
DMX preseting
.Select this function to set desired effects assigning to the channels.Please refer to
the chapter "DMX protocol" for detail description.
LA.Pr.
---
Lamp presetting
.Select this menu to change the lamp "behaviour".
LA.Au.
--- Select this function to turn the lamp on automatically after switching the
fixture on.
d.L.OF.
--- Select this function to switch off the lamp via DMX.
dM.On
--- This function allows you to strike the lamp automatically after 26 seconds if DMX
signal is present on the data link.If the ignition is unsuccessfull (e.g.lamp is too hot),the
fixture will try to ignite the lamp after next 26 s.This process will repeat until the lamp lights.
dM.OF.
--- This function allows you to switch Off the lamp automatically after 2 minutes if
DMX signal is missing on the data link.
LA.dE.
--- Lamp ignition delay. This function allows you to set the time delay( 0-90s) before
the lamp will be ignited.This setting will not affect starting the lamp direct from the control
panel(menu "Lamp On/Off").
En.Sn.
---
Switching on/of the lamp light sensor
.Select this function to switch the lamp light sensor on or
off.The option"On" is for the standard operation.
Important:
The option"Off" is for "emergency operation" only if the lamp light sensor is defective and you will
wait for a service intervertion! If the lamp light sensor is switched off and at switching the lamp on the electronics
will still try to ignite the lamp until it shines (even when the lamp is damaged or absent), on this account some
electronics parts could be damaged!
DiSP.
---
Display adjusting
.This function allows you to change the display settings.
turn
--- Select this function to turn the display by 180°.
d.On
--- This function allows you to keep the display on or to turn off automatically 2 minutes
after last pressing any button on the control panel.
d.Int.
--- Select this function to adjust the display intensity (20-min.,100-max.).
bL.Co.
---
Blackout during movement correction
.Select this function to enable the blackout during the
head movement correction (if the moving head lost its right pan/tilt position for a short moment).
FEEd
---
Pan/Tilt feedback
.This function allows to return the mowing head to the required pan/tilt position after
changing the position by external force (e.g.by stroke).
Be careful, the Pan/Tilt Feedback OFF is not the standard operation and the head of the fixture can
be demaged!
Note: If the feedback was switched off ,the pan/tilt-position is changed by an external force and the feedback
is switched on again,the moving head might not to be synchronized with the DMX signal.You have to make a
reset in order to synchronize the moving head with the DMX signal.
Mi.SE.
---
Microphone sensitivity
.Select this function to adjust the microphone sensitivity from 1(maximum)
to 20(minimum).If the sensitivity is correctly adjusted,the upper segment of the first digit blinks in the bass
beat.
Examples:
underexited
right level
overexited
(upper segment blinks via the bass rhythm)
Содержание Color Spot 575AT
Страница 1: ...1 Version 2 0 ...
Страница 33: ...33 ...