Robe CitySkape Xtreme, Руководство пользователя

Страница: 5 / 24

CitySkape Xtreme (RGBW)
5
3. Installation
3.1 Rigging the fixture
Ensure that the structure (truss, wall) to which you are attaching
the fixture is secure.
Mounting via two Omega holders Mounting points for permanent installation
The mounting holes in the Omega holders have a diameter of 13 mm. Use the clamps with M12 bolts only.
The four mounting holes in the fixture base have a diameter of 17 mm. Use M16 screws for fastening.
The fixture can be placed directly on the stage floor or can be rigged on the structure via two omega holders in
the following positions:
For securing of the fixture on a flat surface in the position
B serves two mounting slots of diameter 8.5mm in the
fixture base.
The four mounting holes of diameter 17mm are intended for permanent installation on the flat surface, especially
in position
C
.
Enhanced care has to be considered during the installation of the fixture in the position
D
via clamps.The clamps
should be fastened to the upper support in order to anable the fixture holding onto the bottom support. In case,
that the clamps are installed on the bottom support, the fixture could move down on account of its weight.