CitySkape Xtreme (RGBW)
17
6.4 Manual mode
Use this menu for control the fixture without connected DMX console.
PrE.C.
--- Preset effects control. Select this menu to call up preset positions of the channel effects.
Man.C.
--- Manual effect control. Select this menu to control all channels via buttons of the control board.
To control fixture channels.
1.
Use the UP/DOWN buttons to find “ Man.C“ menu.
2.
Press the ENTER button.
3.
Use the UP/DOWN buttons to select desired effect (channel).
List of control channels:
“
rEd1” -
“
rEd2”
-
red LEDs saturations, LED modules 1 and 2
“GrE1“ - “GrE2“ - green LEDs saturations, LED modules 1 and 2
“bLu1“ - “bLu2“ - blue LEDs saturations, LED modules 1 and 2
“Whi1“ - “Whi2“ white LEDs saturations, LED modules 1 and 2
“MACr“ - colour macros
“Stro.“ - a strobe, shutter
“dimr“ - a dimmer
4.
Press the ENTER button and use the UP/DOWN buttons to set value , press the ENTER button to confirm it.
6. 5 Test sequences
Use this menu to run demo-test sequences without an external controller, which will show you some possibilities
of using the CitySkape Extreme.
6.6 Stand-alone setting
The fixtures on a data link are not connected to the controller but can execute pre-set programs which can be
different for every fixture. “Stand-alone operation” can be applied to the single fixture or to multiple fixtures
operating synchronously.
Synchronous operation of multiple fixtures requires that they must be connected on a data link and one of them is
set as a master (“MASt“) and the rest as the slaves (“SLA“). Up to 32 fixtures can be connected in a master/slave
chain. Only one fixture can be set as the master.
Note: Disconnect the fixtures from the DMX controller before master/slave operating, otherwise data collisions can
occur and the fixtures will not work properly. See the chapters “Stand-alone operation“ and “ Master/slave
connection“.
Auto. --- Automatic playback
. This function allows you to select the program which will be played after switching
the fixture on. Selected program will be played continuously in a loop.
1.
Use the UP/DOWN buttons to find “
St.AL.
“ menu.
2.
Press the ENTER button.
3.
Use the UP/DOWN buttons to select “
Auto
“ item.
4.
Press the ENTER button.
5.
Use the UP/DOWN buttons to select desired program.
6.
Press the ENTER button to confirm the choice.
PLAY ---
Playing program
. By enter to this menu a complete overview of all programs is offered, from which the
program to be run can be selected.
Содержание CitySkape Xtreme
Страница 1: ...Version 2 2 ...