Robe Anolis Ambiane XP56, Руководство пользователя

Страница: 4 / 23

Ambiane XP56 Recessed
4
2. Installation
Always switch off power supply of the unit before connecting or disconnecting the unit
1. Prepare a circular opening (diameter of 186mm) in the lower ceiling (1) as shown on the picture below.
If you will use the Louver for Ambiane XP Recessed, this circular opening in the lower ceiling has to be of
diameter of 190mm.
If you will use the Top frame for Ambiane XP Recessed, this circular opening in the lower ceiling has to be of
diameter of 215mm.
Important: The Top frame for Ambiane XP Recessed has to be under lower ceiling before its inserting on
the housing of the Ambiane XP56 Recessed.
2. The yoke (2) with three holes serves for fastening the Ambiane XP56 Recessed to the ceiling (construction).
To move the yoke (2) up/down, release both screws (3), (4) on each side of the unit.
To tilt the yoke in range of +/-90° from the vertical axis, release the screw (3) on each side of the unit
Use the Allen key (size 5) to release/tighten screws (3) and (4).
The Ambiane XP56 Recessed has to be secured to the ceiling (construction) via a safety wire pulled through
the mounting lug (5) which serves for securing of the Ambiane XP 56 Recessed to the ceiling (construction) .