ROBBE POWER PEAK TRIPLE 360 W EQ-BID, Руководство по эксплуатации

Страница: 30 / 144

3. CONTROLS
3.1 DESCRIPTION OF CONTROLS
As indicated by the labelling, the 4 operating buttons on the Power Peak® Triple 360 W
EQ-BID have several functions. The buttons trigger different actions in different operating
situations.
"CH“-BUTTON
• The "CH" button is used to select the charger output. The active charger will be shown
with a LED in field "1 2 3"..
DATA VIEW BUTTON
• Shows the charger data, e.g. input voltage. Pressing this button also shows all individu -
al cell voltages of a connected LiPo battery pack.
‘DEC’ / MODE / AUTO BUTTON
• In manual mode this button is used to reduce the values of the charging parameters by
one during set-up and select the previous menu in the menu selection.
• The required operation (CHARGE, DISCHARGE, DISCHARGE->CHARGE or STORE)
can be pre-selected with the MODE button.
• After connecting to the supply voltage, this button is used to activate "automatic mode"
(AUTO.) in the selection menu.
‘INC’ / START / MAN BUTTON
• In Manual Mode- during set-up, this button is used to increase the value of the charge
parameter by one and select the next menu in the menu selection.
Operating instructions
POWER PEAK® TRIPLE 360 W EQ-BID
Order No.
8562
6
© robbe Modellsport
Display
Menu control
buttons
BID-connection:
B:
Battery connection
Equalizer connection:
"CH“-button