7
The boat stand
Attaching the abutment
CLW =
water level
Assembly instructions harbour tug
FAIRPLAY No. 1199
Hint:
It must be ensured that the longitudinal struts are exactly at 90° to the side
plates to ensure the safe and straight position of the model.
Glue on foam rubber, foam rubber or felt
Mounting the boat stand
Important:
Before starting the assembly you should mount the enclosed boat stand to give the model a
safe stand during the work.
To avoid scratching the painted hull, it is essential that the support surfaces of the boat stand
are covered with foam rubber, foam rubber or felt (not included).
Insert the two longitudinal
struts B1 into the side
chord B2
(smaller keel recess).
Make sure that the parts
are inserted exactly flush
into the side plate.
Now glue the side plate B3
(larger keel recess) on the
other side with the two
longitudinal struts B1.
1199_Fairplay.indd 7
08.07.16 22:39
