ROBBE Eolo R 22, Руководство по сборке и эксплуатации

Страница: 6 / 34

6
English instructions for
robbe EOLO
1.3 Assembling the tail rotor drive
system
- Slide the tail rotor drive coupling S5025
onto the short tail rotor drive shaft
S5024 as far as it will go, and tighten
the grubscrew S0041 onto the ma-
chined flat in the tail rotor drive shaft.
- Slide the long tail rotor drive shaft (2
dia x 419) S5018 into the other end of
the tail rotor drive coupling as far as it
will go, and secure it in the same way
by tightening the grub screw S0041
onto the machined flat.
- Press the 3 x 8 x 3 ballraces S4035
into the tail rotor drive bracket S5056.
- Fit the free end of the short tail rotor
drive shaft through the ballraces.
- Slide the 12-tooth gear S5026 onto
the tail rotor drive shaft as far as it will
go, and secure it by tightening a
grubscrew onto the machined flat in
the shaft.
- Place the drive bracket / tail rotor drive
assembly in the chassis, and secure it
with the screws S3370 and washers
S4366. Adjust the position of the tail
rotor drive bracket in the slotted holes
so that the gears rotate freely, but
without slop.
Stage 2