ROBBE Eolo R 22, Руководство по сборке и эксплуатации

Страница: 21 / 34

20
English instructions for
robbe EOLO
- Place the ballraces S4035 and
S43351 in the tail rotor gearbox hous-
ing S5064.
- Slide the tail rotor drive shaft S5024
into the tail rotor coupling S5025 as far
as it will go, and tighten the grubscrew
S0041 onto the machined flat.
- Slip the tail rotor drive shaft through
the ballraces S4035 and S43351.
- Fit the 20-tooth bevel gear S5053 onto
the tail drive shaft, and secure it by
tightening the grubscrew S0041 onto
the machined flat.
The tail drive shaft should have zero
axial play.
- Place the second 20-tooth bevel gear
S5053, the spacer sleeve S5062 and
the tail rotor shalt S5063 between the
ballraces S43351.
- Position the tail rotor shaft so that it
ends flush with the second ballrace.
- Fix the bevel gear on the tail rotor shaft
by tightening the grubscrew S0041
onto the machined flat. Grease the
bevel gears.
7.2 Assembling the control bridge and
actuating arm
- Assemble the parts of the control bridge: 2
x S5039. S5059, S5072, S5054 and
S5073. Screw the sliding sleeve S5059 into
AMMENDMENT