Sweetie‘s lil bro.
The Lil Eight II is an eight-track trigger
sequencer that focuses on the core tasks of a classic
drum computer. No menu diving - the main functions
are directly accessible via the straightforward user
interface. The module offers 16 different patterns
with up to 16 Steps.
Installation
The LL8
II
requires a ±12V power supply (2x5-pin
connector). The red strip of the ribbon cable (-12V
side) must be oriented on the same side as the «Red
Stripe» mark on the board. The module draws about
30mA from the +12V rail.
Operation
Connect input
f
of the LL8
II
to a clock signal from
a sequencer or LFO and the sequencer will start
running. If the sequencer does not receive a clock si-
gnal for a few seconds, it jumps back to the first step
of the sequence and waits until the clock continues.
The LL8
I
now has a dedicated reset input
o
.
Connect the outputs
g
through
n
to the gate inputs
of your drum modules, LFOs or other modulation
sources. Now you‘re ready to go!
