Page: 7
CLEANING, CARE & MAINTENANCE
Attention to regular care and maintenance will ensure long and trouble free operation
of your Toaster.
Ensure the power is off and the Toaster is cool before attempting to clean any part
of the machine.
Wipe the Toaster down with warm soapy water using a
damp
sponge or cloth.
Do
not
immerse the Toaster in water or allow the ingress of water into the ventilation
holes or controls. Do clean using oxidising chemical cleaners because plastic parts
can be affected.
Daily cleaning of the crumb/drip tray is essential. The crumb/drip tray may be
removed by sliding it out from the Toaster. The crumb/drip tray should be emptied
and washed with warm soapy water.
The top reflector should also be checked and cleaned periodically. The reflector is
located on the underside of the top. To remove the reflector, simply slide it out.
The unit should not be operated without both the crumb tray and the reflector
being correctly installed in their respective positions.
Always ensure the power cable is not in contact with hot parts of the Toaster when
in use, and have any damaged power cord replaced immediately.
Note:
The reflective surfaces of the crumb/drip tray and top reflector aid the
cooking process. Over time, these surfaces may become tarnished and this
reduces the efficiency and performance of the toaster. To overcome this,
aluminium foil can be wrapped over these two components to restore a good
reflective surface. This foil can then be replaced when necessary. NEVER allow
this foil to cover or impede the ventilation holes in the top of the unit (located in front
of the reflector).
