Page
3
INSTALLATION
Remove all the packaging materials and tape, as well as any protective
plastic from the unit. Clean off any glue residue left over from the protective
plastic using methylated spirit. Do not remove the double-sided adhesive
tape at this stage.
Tools
To assemble the trolley the following tools are required.
•
Rubber or wooden mallet.
•
Allen Key. (Supplied in kit)
Please note:
If you use a metal hammer, place a block of wood on the
metal parts and strike the wood to prevent damage to the metal parts.
ET24 Step-by-Step Instructions
Instructions are the same for every model, but the frame sizes and number of
panels differs.
1. Organise the frame to resemble below
(Please note that all the Horizontal bars should have end fittings screwed into either end of
them.)
MS0428
MS0427
MS0392
