Robam JZT B110 Скачать руководство пользователя страница 12

10

Gas Hob

Cleaning

CLEANING OPERATIONS MUST ONLY BE CARRIED OUT WHEN THE HOB IS COOL.

SHOULD BE DISCONNECTED FROM YOUR MAINS SUPPLY BEFORE COMMENCING ANY CLEANING

PROCESS.

THE APPLIANCE

Cleaning the hob top

remove any

residues with warm soapy water.

◆,

Abrasive cleaners or sharp objects will damage the hob surface you should clean it using warm soapy water.

,

Although it is easier to clean some deposits whilst he hob surface is still warm make sure that the hob surface,

pan supports and hob burners have all cooled sufficiently before you attempt to touch them.

Any residues that are left on the hob top surface from cleaning agents will damage it. you should

After each use

appliance over with a soft  damp cloth that has been put into warm

,

soapy water  The cloth should  be wrung out after being taken out of the soapy water.

.

Dry the appliance by rubbing the surface with a soft,  clean cloth.

We would recommend that an appropriate stainless steel cleaner and polish is regularly used on the stainless

Remove the pan stands and wipe the

steel surfaces of this appliance.

Cleaning the hob burners

The hob burners should be cleaned once a week or more frequently if they get soiled.

Remove the hob burners by pulling them upwards and away from the hob top.

Soak them for about ten minutes in hot water and a little detergent.

◆,

After cleaning and washing them wipe and dry them carefully.

◆,

Before placing the burners back on the hob top make sure that the gas jet is not blocked.

Clean And Maintenance

IMPORTANT

:

Cap

External 3.5 cap

Flame spreader

Ignition electrode

(The figure is provided for reference only and subject to the actual product.)

Thermocouple

Make sure that you reassemble the burners in the original way.

Make sure that the hob surface pan stands and hob burners have cooled before you attempt  to

,

touch them.

Great care should be taken whilst using this appliance and when following the cleaning procedure.

You should not use a steam jet or any other high pressure cleaning equipment to clean the appliance.

Cleaning of the hob should be carried out on a regular basis

,and suggest take a full check 

every

 12 months.

Before attempting to clean the appliance, it should be disconnected from the mains and cool.

Injector holder assembly

Содержание JZT B110



















Отзывы: