Tick
mark
10
Light
Removal
Raise
it
outward
forcibly
to
remove
the
spotlight
from
the
hood
.
Pull
out
the
connector
to
replace
the
spotlight
.
Insert
a
small
flathead
screwdriver
or
something
sharp
in
the
gap
between
the
light
cover
and
hood
.
Notice
Maintenance
and
Services
Warning
1
.
There is a fire risk if cleaning is not carried out in accordance with the instructions.
2
.
Cleaning and maintenance shall be conducted under outage. Electrical components such as motor, switch,
and connector shall not be spoiled by water so as to prevent from accidents.
3
.
It
'
s prohibited to wash with water so as to prevent accidents.
4
.
Stove fire shall be extinguished timely
when
it
is
not
used
;
do not flambe under the range hood and it
'
s
prohibited to bake food under range hood directly
to prevent range hood from damaging and causing
accidents.
5.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly
qualified persons in order to avoid a hazard.
6.Accessible parts may become hot when used with cooking appliances.
●
The hood shall be cleaned and maintained
regularly
depending
on
the
surroundings
,
so
as
to
keep
its
cleanness
&
efficiency
and
extend
its
service
life
.
We recommend: Clean the surface of hood each time after cooking.
To ensure smooth discharge of fumes, the mesh cover shall be cleaned regularly with warm water and detergent
according
to
actual
situations
.
Be
careful
to avoid damage
.
●
Don’t use the powerful detergent, we recommend to wipe
with
wet
cloth
soaked
in
neutral
detergent and dry
it by soft cloth. And avoid detergent to touch switches.
●
Don
'
t
keep
dirt on the surface of range hood for long time;
●
Don
'
t
use
cleaning
ball
,
brush
or
other
harsh
tool to clean range hood. It may cause scoring.
●
Wear
gloves to clean or maintain range hood avoiding from hurt.
●
Check
oil
cup
regularly. Hold oil cup by hands as picture,
then remove oil cup and pull out waste oil.
●
Don
'
t
touch
lamp
if
turn
on
or turn off in short time. It may cause scald.
●
If range hood don’t use for long time, pull out the plug. Don’t haul plug crudely.
Parts
Removal
1.The machine body needs not to be disassembled in ordinary conditions. Disassembly shall be operated by
professional serviceman.
2. The electricity must be cut off before clean, installation or maintenance of range hood.
Note
:
The
assembly
steps
are
opposite
with
the
disassembly
steps
.
Please
wear protective glove during operation avoiding from hurting hands.
Warning
Range Hood
