Robam CS46-W270 Скачать руководство пользователя страница 29

Страница: 29 / 32

than 0.427 ohm. In case necessary, please consult your supply authority for
system impedance information.

Connecting the hob to the mains power supply

The power supply should be connected in compliance with the relevant standard, or a
single-pole circuit breaker. The method of connection is shown below.

1. If the cable is damaged or needs replacing, this should be done by an after-sales

technician using the proper tools, so as to avoid any accidents.

2. If the appliance is being connected directly to the mains supply, an omnipolar circuit

breaker must be installed with a minimum gap of 3mm between the contacts.

3. The installer must ensure that the correct electrical connection has been made and that it

complies with safety regulations.

4. The cable must not be bent or compressed.
5. The cable must be checked regularly and only replaced by a properly qualified person.

Содержание CS46-W270

































Результаты поиска

Содержание CS46-W270

Отзывы:

Бренды по названию

Популярные бренды

Robam CS46-W270, Руководство пользователя

Результаты поиска

Содержание CS46-W270

Отзывы:

Бренды по названию

Популярные бренды