Robalo R206 Cayman, Руководство владельца/оператора

Страница: 66 / 78

2019 ROBALO BAY BOATS
Robalo Boats, LLC.
www.robalo.com
Steering System
1. Check all hydraulic lines and hoses for leaks. Make sure no lines
and hoses rub against other parts and or come into contact with
any extremely hot parts. Tighten all fittings and clamps as
required.
2. Check all bolts for tightness
3. Check the steering fluid level in the helm.
4. Replace any hoses showing signs of wear and remove the cause or
re‐route hoses.
5. Check fittings and seal locations for leaks, damage, and service as
necessary
Consult your Robalo dealer regarding all repairs or replacement parts.
Bilge
Inspection
Check the bilge before you use your boat—every time! A small amount of
water in the bilge is normal and not a cause for concern. If the amount of
water is excessive, check for water leaks. Repair leaks immediately.
If the bilge is ever filled with fuel or oil, check engine, hoses, fuel tank(s),
etc. for leaks. Repair immediately.
Important: Pumping fuel or oil overboard into the water violates the
Federal Clean Water Act. Pump into suitable container and dispose of
properly.
Cleaning
Run bilge until pump is dry. Remove all sand, silt, dirt, or foreign
material. Make sure all limber holes are open and strainers are clean.
Use bilge cleaner to remove any obvious oil stains.
Important: Never use any flammable solvents for cleaning the bilge.
Check with your Robalo dealer for recommended cleaners.
WARNING: Gasoline or vapors in bilge can explode. Remove all sources
of ignition. Do not start engine, repair immediately.
62
https://www.boat-manuals.com/robalo/