Electrical System
57
© 2016 by Erwin Hymer Group North America, Inc.
Inverter LEDs
To connect to external (shore) power, open the rear
doors and remove the power cord from underneath the
sofa bed. The rearmost of the utility bays on the bottom
of the driver's side contains the connection point for the
power cord. Plug the power cord into the campsite 30A
power source and the other end into the E-Trek. Your
remote inverter display has an indicator light to tell you
when you are connected to shore power. If the indicator
light is not lit, check the breakers on the campsite
power source. For a concise summary of how to
connect and disconnect shore power see HOWTO:
Shore Power.
Electrical Outlets
The outlets are powered from the inverter at all times.
The outlets are protected by GFCI (ground fault circuit
interrupters). All the outlets in your E-Trek should have power when the inverter is on.