21
© Erwin Hymer Group North America, Inc., R00
Table Legs and Leg Mounts
The table(s) can be set up to use either for front seating or rear lounge area for dining, computer, gaming, or other recreational use. (See Pictures
and Further Description on Page 21 and 22.) The table legs are stored in the closet to the rear of the washroom. (Picture 21.3)
The leg keys into a T-Nut fitting in the slot of the floor plate(s). (Picture 21.1) *
Note – All table leg floor plates come with covers, remove and
store in a safe place before inserting T-Nut into the floor plate.
*
To install the table leg in the floor plate, unscrew the T-Nut all the way on the end of the table leg and insert the T-Nut into the slot in the floor plate.
Rotate the table leg clockwise until the table leg is secure and does not wobble. If it does not tighten after 2-3 turns, remove the table leg unscrew
the T-Nut all the way and repeat. (Picture 21.2)
If it's set up right, it will lock in place with little effort. If not setup correctly don’t force the T-Nut. Remove and insure that the T-Nut is fully
extended and check the keyway on the floor for any obstructions.
T-Nut Fully Extended – Leg Mount Base.
Leg Mount Bases Located in Coach Rear
(Shown Here) and in Front Between Front
and 2
nd
Row Seating.
Double Table Leg Storage Inside Closet to
the Rear of the Washroom.
Picture 21.1
Picture 21.2
Picture 21.3
