23
Table Storage and Front/Rear Lounge Table Setup (Continued)
The table tops are stored in the rear under the driver’s side bolster cushions and behind the driver’s seat
(*Note – Table bottoms fit into circular
base holders to keep them from moving or rattling while your motorhome is in motion.*) (Picture 22.2 on Previous Page.)
The larger rectangular-shaped table fits in the rear underneath the passengers side bolster cushion. (Picture 22.1 on Previous Page.)
The large multi-angled shape table fits up against the cabinet housing the refrigerator just behind the driver’s seat. (Picture 22.3 on Previous Page.)
The rear table has a small piece of honeycombed grip liner to place on top when stored. This keeps the cushions from sliding off or moving while
motorhome is in motion. (Picture 22.1 on Previous Page.)
Either table can be used for front or rear dining. The larger multi-angled table rotates to allow you to walk around the table setup without having to
remove it from the pedestal. (Picture 22.4 and 22.5 on Previous Page.)
To stow the front table, place the bottom of the table behind the rubber bumpers along the bottom, and secure the top with the two white clips
attached. (Picture 22.6 on Previous Page.)
Roadtrek Inc.
