Roadtrek 190-Popular Chevrolet, Руководство пользователя

Страница: 41 / 82

41
© Erwin Hymer Group North America, Inc., R00
Optional Rear Door Screen (Continued)
Open the screen and locate the edge with hook and loop material along it. This edge is the bottom, so use the hook-and-loop strips on the screen
to attach it across the bottom of the door opening.
Start the zipper at each bottom corner by pushing the bottom stop (the metal end) of the zipper into the two back-to-back zipper sliders, and zipping
the top slider upward. At the top, close the flap with the hook-and-loop fastener strip where the zippers meet. (Pictures 40.3, 40.4)
Use the double slider to unzip the bottom of the screen to allow access to the under-bed storage area in the back of the Roadtrek without disturbing
the top section. (Picture 40.5)
To remove and stow the screen, unzip it from the top down. Unzipping it from the bottom will not allow you to remove it from the doorframe
surround.
Optional Side Door Screen
In addition to the rear door screen, there is also an optional side door screen which will allow you to keep the side door open for ventilation without
admitting insects. (Picture 42.3) There is a zipper in the screen so you can enter and exit without removing the screen. (Picture 42.2)
Locate the screen in the white box that comes with your new Roadtrek, and shake it out. To orient the screen correctly, look for the zipper in the
screen - hold the screen so that the zipper goes across near the top and then down the right side. Start the hook and loop fastener at a convenient
corner and work your way around the perimeter until the screen is secured. (Picture 42.1)