Roadtrek 170 Chevrolet, Руководство пользователя, Страница: 27 / 92

FRONT LOUNGE SEATS:
To convert the lounge seat into a single bed:
1. Be sure all armrests
are in an upright
position. Swivel the
captain’s seat 270
degrees clockwise
so that the backrest
is toward the center
aisle, (see Picture
B-P22).
2. Remove the lounge
seat back and place
the folding mattress
hard side down
between the lounge
seat base and
captain seat base.
Unfold the mattress
and arrange to fit as
necessary. (See
Pictures B-P23,
B-P24, and B-P25).
To convert back to a
lounge seat, perform
these steps in reverse
order.
The lounge seat is designed to carry a passenger while your vehicle is in motion and is equipped with seat belts
installed for their protection. All passengers must be seated in the front captain’s seats facing forward or the
passenger lounge seats with seat belts fastened while vehicle is in motion. All other seats are not to be occupied
while vehicle is in motion. The lap belts must be worn across the hips and not across the abdomen. Passengers
must sit well back in the seat and in an upright position.
Daily living
Doc No: 21906503 Rev: 05 Copyright © Roadtrek Motorhomes Inc. 2007 B - 11
Picture B-P24: Folding Matress in place
from front door.
Picture B-P23: Folding mattress in
place.
Picture B-P22: Swiveled front captain seat.
Picture B-P25: Front lounge bed.
1
2
3
4