Roadtrek 170 Chevrolet Скачать руководство пользователя

Страница: 11 / 92

190 Four-wheel-drive, (option).

QUADRA-VERSION FOUR-WHEEL DRIVE

Made possible by the TWO-SPEED TRANSFER CASE, provides maximum traction for the wheels of your van by
transmitting engine torque to all four wheels instead of just the two rear.

OPERATION

CAUTION: The vehicle should only be engaged in 4 Wheel
Drive for off road operation or when road or weather
conditions create poor traction. When you are operating the
vehicle on DRY roads keep the transfer case in 2H to
prevent excessive drive train wear.

ENGAGING FOUR WHEEL DRIVE

Front Axle Locking Feature -

The front axle locks and

unlocks automatically when you shift the transfer case. A
short delay for the axle to lock or unlock is normal. If road
conditions provide good traction there may be a delay for
the axle to unlock.

Manual Transfer Case -

The transfer case shift lever is on

the floor to the right of the driver. Use this lever to shift in and out of four-wheel drive.

The four-wheel drive indicator light will come on after you shift into four-wheel drive and the front axle engages.

2-Wheel High (2H):

This setting is for driving in most street and highway situations. Your front axle is not engaged

in two-wheel drive.

4-Wheel High (4H):

This setting engages your front axle for increased traction. Use 4H when you need extra

traction, such as on wet or icy roads, or in most off-road situaions.

You can shift from 2-WHEEL HIGH (2H) TO 4-WHEEL HIGH (4H) or from 4-WHEEL HIGH (4H) TO 2-WHEEL HIGH (2H)
while the vehicle is moving. Do not shift into 4H while accelerating. In extremely cold weather, it may be necessary
to stop or slow the vehicle to shift into 4-WHEEL HIGH (4H).

Neutral (N):

Shift to this setting only when your vehicle needs to be towed or when using a power take-off. CAUTION:

To guard against vehicle moving while unattended, NEVER park your vehicle with the transfer case in neutral.

4-Wheel Low (4L):

This setting also engages your front axle for increased traction and the lower gear increases

power. It should be used only for off-road driving.

To shift into or out of 4-WHEEL LOW (4L) OR NEUTRAL (N):

Slow the vehicle about 1 to 3mph (2 to 5 km/h) and shift into NEUTRAL (N).

Shift the transfer case shift lever in one continuous motion. Do not pause in NEUTRAL (N) as you shift
the transfer case into 4-WHEEL LOW (4L), or your gears could clash. This will require you to turn
engine off.

Remember that driving in 4-WHEEL HIGH (4H) or 4-WHEEL LOW (4L) may reduce fuel economy. Also, driving in
four-wheel on dry pavement could cause your tires to wear faster and make your transfer case harder to shift and run
noisier.

RETURN TO FOUR-WHEEL DRIVE

Shift the transfer case to the two-wheel drive position (2H), when the need for 4-wheel drive is no longer required.

Quigley Motor Company, Inc.

PHONE: (717) 266-5631

(800) 233-9358

FAX: (717) 266-6248

www.quigley4x4.com

TRANSFER CASE RANGE SELECT-
IONS FOR MANUAL OR AUTOMATIC
TRANSMISSIONS

4-WHEEL DRIVE (LOW RANGE)
POSITION
Power to front and rear axles
at reduced speed.

NEUTRAL
No power to either axle.
Use for vehicle towing.

2-WHEEL DRIVE POSITION
Power to rear axle only.

4-WHEEL DRIVE POSITION
Power to front and rear axles
at normal speed.