Deutsch
Deutsch
13
14
FERNBEDIENUNG
BATTERIE
Die Infrarot-Fernbedienung erfordert zum Betrieb zwei Batterien vom Typ AAA (nicht mitgeliefert).
BESCHREIBUNG DER BEDIENTASTEN
1) FIND
Im MP3/WMA-Modus zur Suche nach Datei- oder Albumnamen.
4) REP/INTRO/RAN Im USB-Modus zum Aufrufen der Funktionen Wiederholung (1/Alle),
Intro und Zufallswiedergabe.
5) PROGRAM
Im USB-Modus zum Aufrufen der Programmierfunktion.
6) PLAY/PAUSE Im USB-Modus zum Starten der Wiedergabe einmal drücken; bei
erneuter Betätigung schaltet das Gerät in den Pausenmodus.
7) SKIP/SEARCH vorwärts
Bei einmaligem Drücken weiter zum nächsten Lied;
Vorwärtssuchlauf bei dauerhafter Betätigung.
10) SOURCE
Im USB-Modus zur Auswahl der USB/Card-Funktion.
11) TRACK SEPARATION um die eingezeichnete Stücke in einzelne Stücke (Pisten) zu
unterteilen, während der Kodierung vom Plattenspieler.
NETZANSCHLUSS
Bevor Sie das Gerät einschalten, vergewissern Sie sich, daß Ihre örtliche Netzspannung
mit der auf dem Typenschild angegebenen Spannung übereinstimmt.
Zu Ihrer eigenen Sicherheit lesen Sie sorgfältig die folgende Bedienungsanleitung, bevor
Sie das Gerät ans Netz anschließen.
NETZBETRIEB (AC)
Dieses Gerät funktioniert nur mit einer Spannung von AC 230V 50Hz. Wird das Gerät an
andere Stromquellen angeschlossen, könnte es Schaden nehmen.
Vorsicht
Um elektrischen Schlägen vorzubeugen, trennen Sie das Gerät vom Netz ab, bevor Sie den
Deckel entfernen. Verwenden sie keine nutzbaren inneren Teile. Für die Wartung wenden
Sie sich an qualifiziertes Kundendienstpersonal.
Sicherheitsmaßnahmen
Setzen Sie das Gerät weder Regen noch Feuchtigkeit aus.
Stromversorgung: AC 230Volt / 50Hz - nur Wechselstrom (AC)
Dieses Zeichen bedeutet, daß dieses Gerät doppelt isoliert ist. Eine Erdung ist nicht
notwendig.
VORBEREITUNG FÜR INBETRIEBNAHME
•
Nehmen Sie das Gerät vorsichtig aus der Verpackung.
Bewahren Sie diese für einen eventuellen späteren Gebrauch auf (Service).
•
Bitte lesen Sie diese Bedienungsanleitung sorgfältig, bevor Sie das Gerät in
Betrieb nehmen.
Netzbetrieb (AC)
•
Schließen Sie das AC-Netzkabel an Ihr AC-Haushaltstromnetz an.
RUNDFUNKEMPFANG
1.
Stellen Sie den Funktionswahlschalter (7) auf Radio.
Die EIN-Anzeige erleuchtert (5).
2.
Wählen Sie das gewünschte
FM oder FM STEREO mit dem schalter (10).
3. Stimmen Sie die gewünschte Radiostation mit dem Abstimmregler (19) ab.
Antenne
Für den UKW-Empfang befindet sich auf der Rückseite des Gerätes ein eingebauter
UKW- Antennendraht (28). Bewegen Sie den Draht hin und her, bis der beste Empfang erreicht
wird.
3) REC
Im Phono-Modus zur Aktivierung der Aufzeichnungsfunktion.
SKIP/SEARCH rückwärts
Bei einmaligem Drücken zurück zum vorangehenden Lied;
Rückwärtssuchlauf bei dauerhafter Betätigung.
8) STOP
Im USB-Modus zum Stoppen der Wiedergabe bzw.
2) INFO
Im USB-modus
Drücken zurück zum Aktivierung die ID3 funktion
9)
+10/-10 Im MP3-Modus
Drücken zurück zum zu übersp10 verfolgen vorwärts
oder rückwärts.