English
English
REPEAT/INTRO/RANDOMMODE (BY REMOTE CONTROL)
Press the Repeat/Intro/Random button (4) on the remote control before or during playback,
a single track, single folder (MP3 only) or all the tracks can be played in different mode as
follows:
FOR MP3/WMA
INDICATOR
INTRO PLAY MODE
INTRO
RANDOM MODE
RANDOM
OFF MODE
------------
Repeat play
You can listen the desired tracks or folder repeatedly by this function.
Intro play
You can listen the beginning (10 seconds) of each track in a cd by this function & saving
your time to search the desire song
Random play
You can listen all the tracks or folder in a random order by this function
USB/SD PROGRAMMING (BY REMOTE CONTROL)
the system is at stop mode before programming:
1.
Set in USB mode with the Source button (10).
2.
Press the “PROGRAM” button (5), “ PROG “ will appear on LCD display. Moreover, it
will indicate program no. and digits for track no. to be programmed.
3.
Select a desired track by pressing SKIP
or
buttons (7).
4.
Press the “ program “ button to store the trace into memory.
5.
Repeat steps 3 and 4 to enter additional tracks into the memory if necessary.
6.
When all the desired tracks have been programmed, press “ PLAY/PAUSE “
button
(6) to play the disc in assigned order.
PLAYBACK OF MP3/WMA SONG VIA USB STORAGE MEDIA OR MEMORY
CARD CONNECTING
The system is able to decode and playback all MP3 /WMA file which stored in the memory
media with USB connecting port or SD/MMC memory card.
1.
Set Function selector (7) at USB mode and then press SOURCE button (10) to select
“ USB or CARD” mode.
2.
Plug-in the USB plug with the face up & make sure it going into completely or insert
the memory card in the direction of the arrow as shown in the label on the underside
of the MEMORY CARD slot cover. Insert straight without bending.
Connecting the USB upside down or backwards could damage the audio system or
the storage media (usb thumb drive / sd/mmc card). Check to be sure the direction is
correct before connection.
7
8
REMARK
-
The system can detect and read the file under mp3
and wma format only though the usb port.
-
If connect the system to MP3 player via the usb
socket, due to variances inMP3 encoding format,
some mp3 player may not be able to play via the
usb socket. this is not a maul-function of the
system.
(1) REPEAT 1
(2) REPEAT ALL TRACK
(
5
) OFF MODE
(
4
) RANDOM
(
3
) INTRO PLAY
PLAY MODE
ON LCD DISPLAY
REPEAT SINGLE TRACK
REPEAT ALL TRACKS
ALL
7.
To cancel the programmed file, press
PROGRAM
” button on remote handset
during STOP mode until
“ PROG “ is disappear on LCD display (2).
3.
The system will start reading the storage media automatically after connecting, and
LCD display (2) will show the total number of MP3 files
, then will start playback
automatically.
Up to
10
tracks can be programmed for MP3 file and play in any order. before use, be sure
