Roadstar HIF-1899TUMPK, Руководство пользователя

Страница: 8 / 56

3 English
TO USE THE RADIO
1. Set the Mains [POWER SWITCH] (0) to ON;
2. Press the [POWER] button (2) to turn ON the unit;
3. Select the desired audio source by pressing the [SOURCE] button (7 to 11);
4. (Please see detailed instructions for each Source in the following chapters);
5. Adjust the volume with the
[VOLUME KNOB]
(3) to the desired level;
6. Press and hold the [POWER] button (2) to turn OFF the unit.
Note: When no sound is produced, the unit will switch OFF automat. after 10 minutes.
RADIO OPERATION
1. Press the [AM] or [FM] button (7 or 8);
2. Adjust radio frequency to your desired station by turning the [TUNING KNOB]
(19).
Note: For a better reception FM move the wired antenna (23) around.
For MW reception the signals are picked up through a built-in ferrite antenna. You
may have to orient the unit to obtain the best reception.
TURNTABLE OPERATION
Note: When using the turntable for the first time, unscrew in clockwise sense the
[TRANSPORT SCREW] (27) located on the upper right side of the turntable.
1. Press the [PHONO] button (11);
2. Place a record on the turntable. Place the EP adapter over the central spindle
when playing 45 rpm records;
3. Set the [SPEED SELECTOR] (31) to 33, 45 or 78 rpm according to the record;
4. Release the [TONEARM CLAMP] (29), and remove the stylus protector;
5. Lift up the [TONEARM] (28) with the [LIFT LEVER] (30);
6. Move the [TONEARM] (28) to the beginning of the record;
7. Lift down the [TONEARM] (28) with the [LIFT LEVER] (30);
8. When the record is finished the [TONEARM] (28) will automatically return to the
rest support and the [PLATE] (26) will stop turning. To stop manually, lift up the to-
nearm from the record and return it to the rest support.
Note: Do not stop or turn the [PLATE] (26) manually.
When the unit is moved or transported:
•
Lock the [TONEARM] (28) with the [TONEARM CLAMP] (29);
•
Place the protective cap on the stylus (even when not in use);
•
Screw the [TRANSPORT SCREW] (27) counterclockwise until you feel resistan-
ce (do not screw it completely).