background image

PROPER INSTALLATION OF SAFETY CABLES

For all towing systems…

  Use the built-in 

cable guides

 and cross the safety ca-

bles under the hitch receiver, as shown in Figure 14.
  Unscrew the 

connecting nuts

 on each 

quick link

 to 

connect the 

safety cable loops

. Finger-tighten the nuts 

firmly, until the loop is completely closed, to secure the 
attachment. Do not substitute carabiners or other devices 
for the quick links — the quick links are designed to hold 
the weight of a towed vehicle; carabiners or other devices 
are not.

Option 1

  If the tow bar 

mounting bracket

 is similar to the one 

shown in Figure 14 and the safety cables are long enough, 
connect the 

snap hook

 (or 

quick link

) to the 

safety cable 

anchor

 built into the mounting bracket.

 

Note: the snap hooks can be attached at either the 

towed vehicle or the motorhome.

Option 2

  Some ROADMASTER tow bar mounting brackets with 
removable arms, such as the one in Figure 15, use both 
a long safety cable and a short safety cable on each side.
 Each 

long safety cable

 runs from the towing vehicle to 

quick link

 attaching it to one of the 

quick-disconnects

This quick link is also an attachment point for one of the 

short safety cables

; another quick link attaches the short 

safety cable to the 

mounting bracket

.

 

The safety cables must be carefully routed so that 

they cannot become pinched, frayed, scraped or oth-
erwise damaged, and so they will not drag when go-
ing over dips or low spots. Do not use the cables if 
they show any signs of wear or damage — immediately 
discontinue towing and replace the cables.  
  Failure to follow these instructions will result in 
cable failure, which may cause property damage, per-

Figure 14

Figure 15

Option 2

Option 1

(Safety cable anchor is not present on all brackets.)

sonal injury or even death.

  If the quick links are not completely tightened, with 
the loop closed, the safety cables may detach. In the 
event of a towing system failure, the towed vehicle will 
detach, which may cause property damage, personal 
injury or even death.

  If your towing system requires two sets of safety 
cables, always use both the long and the short safety 
cables. Connect them as shown in Figure 15. Oth-
erwise, in the event of a towing system failure, the 
towed vehicle will detach, which may cause property 
damage, personal injury or even death.

8

Содержание StowMaster ALL TERRAIN















Отзывы: