KIT# 917-3
04/21/08
KS
All illustrations and specifications contained herein are based on the latest information available at the time of publication approval.
ROADMASTER, INC. reserves the right to make changes at any time without notice in material, specification and models or to discontinue models.
1.
Important:
please use all supplied bolts and parts and read all instructions carefully before begin-
ning this installation. The majority of questions you may have can be answered within the text, and
proper installation will ensure safe and secure travel.
Now, begin the installation. Start by removing a
plastic fastener and a 10mm (head) bolt on each side of the fascia near the headlights (Fig.B,C,D).
2. Push down on four clips in the middle of the grille then pull forward to remove (Fig.E,F).
3. Remove nine plastic fasteners from under the fascia (Fig.G), then two more located higher on the splash
panel on each side (Fig.H).
Fig.B
Fig.C
Fig.D
Fig.E
Fig.F
Fig.G
Fig.H
Fig.I
Fig.J
Fig.K
Fig.L
BASEPLATE KIT
INSTALLATION INSTRUCTIONS
ROADMASTER, Inc. 6110 NE 127th Ave. Vancouver, WA 98682 1-800-669-9690 fax 360-735-9300 www.roadmasterinc.com
4. Remove two more plastic
fasteners on each side near the
frame rails in the center splash
panel (Fig.I) then locate and
remove a 12mm (head) rear
mounting bolt to the rear of the
splash panel (Fig.J). Remove two
more mounting bolts in the front of
the center splash panel and set
them aside (Fig.K,L).
