4
Safety Instructions
To ensure proper operation please read the manual before installation and use.
Failure to follow this safety notice may cause a malfunction and may void the
warranty.
Do not clean the product
with water or volatile solvents.
This may damage the product,
cause a fire or electric shock.
Do not apply excessive
shock or never insert foreign
materials into the product.
This may cause product
damage, a fire or a short circuit.
Video quality is affected
by lighting conditions. GPS
is affected by signal
receipt. Nighttime or use in
tunnels affects system
operation.
Do not arbitrarily change
the product location.
This may cause a GPS
communication error.
Do not disassemble, repair or
modify the product.
This voids the warranty and
where we take no responsibility
for product damage or problems
caused by the user.
Any excessive window
tinting may cause an
unclear or distorted image
on playback.
First record and then play back
the video to see if the recorded
video is acceptable.
Do not cover the camera
lens with any materials or
objects.
This may affect recording quality.
Once installed, do not
manipulate the product
while you’re driving a car.
This may cause a traffic
accident.
Ensure that the capacity of
the SD card is not exceeded.
A full SD card will not allow one
to record manual alarms or G-
sensor based triggers.
Use only the provided
cables and specified power
input.
A cable not supplied by the
manufacturer may cause
product damage, a fire or a
short circuit.
Do not obstruct the view of
the product through the front
windshield.
The GPS receiver may not work
properly.
Only use factory approved
parts. Use the approved
power cable.
Contact your authorized
Reseller for assistance.
