Roadefend RDT401P, Инструкция

Страница: 10 / 15

Instructions for use of RDT401P 2018-RDT401P-R001
9
3. Product list
Table 3
Product List
Serial No. Parts Name Quantity
①
Host
1 pcs
②
Bracket
1 pcs
③ Bracket screw 4 pcs
④ Power harness P2-five-core plug (female) 1 pcs
⑤
GPS Antenna
1
pcs
⑥
Microphone (optional)
1
pcs
⑦
Instruction book
1
pcs
4.
Calibration
Adjust the angle of RDT401P up and down to ensure that the driver's face is in the center of the
screen of an external display.
5.
Work status
1) After the vehicle starts, RDT401P will start immediately; after about 8 seconds, it will make a
sound indicative of start-up completion, indicating that the product is ready for work.
2) After the vehicle’s speed reaches the set speed value, the product will enter the monitoring state,
monitor the driver in real time, and issue fatigue warning; according to factory default settings,
when the speed exceeds 15km/h, the device will start a state detection function (except for the type
of posture warning) and when the speed exceeds 30km/h or more, posture calibration will be
performed.
After the posture calibration is completed, all warnings can be triggered.
Notes: the starting speed of fatigue warning function for RDT401P is 15km/h.
6.
Parameters Configuration for SD (TF) card
Through the system upgrade, you can adjust parameters of the device, such as volume, sensitivity,
time zone.
Bracket
Bracket screw Host
Figure 7. A schematic diagram of parts