Roadefend RDT401P, Инструкция

Страница: 2 / 15

Instructions for use of RDT401P 2018-RDT401P-R001
1
I. Product Synopsis
Roadefend RDT401P is a bran-new Driver ADAS Safety Monitor System based on the fifth
generation of video based driver state analysis technology, which gives a warning of fatigue drive
and kinds of dangerous driving behaviors by means of image recognition and driver’s mental state
analysis to decrease accidents caused by fatigue drive. Furthermore, RDT-401P-WH is also
capable of sending abnormal data and videos via 4G network to an end-user platform management
center to avoid occurrence of accidents by immediately taking effective measures.
The product performance meets the relevant national standards of "GB/T 19056-2012", "JT/T794-
2011" and "GB/T 26773-2011".
1.
Value of Fatigue Warning
Fatigue has long been an inevitable problem that is controlled to an extent for drivers, for example,
when driving two hours at a speed of 100km/h, the driver has to struggle to stay awake on account
of his lower levels physiological functions followed by inattention. In general, accident rates are
extremely high when the driver drives more than 6 hours a day or is lack of proper rest, for example,
only having a rest of less than four or five hours last night. In addition, with the popularity of smart
phones, more and more drivers are used to playing his cellphone while driving, it also will cause a
popularity of accidents.
A set of terrible statistics has already been reported, indicating that 72% of all accidents occur due
to drivers themselves and 25~30% thereof are caused by fatigue drive; that 40% of all serious and
fatal accidents are fatigue related; that 70% of all drivers will fall asleep at the wheel on the highway
and specially happens to those who likes playing their cellphones while driving.
Therefore, it is a great value to eliminate fatigue at driving for sake of the drivers, families,
companies, as well as the society.
2.
Host introduction

Power supply and signal harness
It works when power connectors are
connected to corresponding power
interfaces on the RDT-401P-WH device;
the main harness contains the power cable,
video cable, communication cable, network
cable, and GPS antenna etc.
 SD card slot
 SIM card slot
 MIC input
 Base holder