9
Flip (Light Blue):
Pressing the FLIP button four times cycles the camera through four
different picture orientations. This button is located in the upper left side of the remote
control.
Color Mode (Blue):
Press the COLOR MODE button, which is located in the upper
right side of the remote control, to cycle through color modes. See
Color Modes
for
more information.
Brightness (Yellow):
Press the top BRIGHTNESS button to increase the brightness
level. Press the bottom BRIGHTNESS button to decrease the brightness level. These
buttons are located in the center of the remote control.
Zoom (Black):
Press the PLUS button to zoom in and enlarge the image that
appears on the screen. Press the MINUS button to zoom away from the image on the
screen. These buttons are located in the center of the remote control.
Freeze Frame (Red):
Press the FREEZE FRAME button once to freeze the current
image that appears on the screen. The Freeze icon displays on the screen. Press it
again to turn off Freeze Frame mode and return to the live camera view. The button is
located on the lower left side of the remote control.
Focus Lock (Orange):
Press the FOCUS LOCK button to turn off Auto Focus. When
Auto Focus is off, as indicated by the Focus Lock icon, the camera does not adjust its
focus. Turning Auto Focus off makes it easier to write or work with an object, because
the camera will not automatically focus on your hand. During normal operation, it is
recommended that you leave Auto Focus on. Press the button again to restore Auto
Focus mode. It is located on the lower right side of the remote control.
Reading Lines (White and Black):
Press the READING LINES button to display two
horizontal or vertical lines on the screen. Use these lines to help you maintain your
place while reading text or viewing an item. You can then use the UP/DOWN and
WIDTH buttons to adjust the position and the distance between lines on the screen.
Remove the button cover on the front of the remote control to access these buttons.
Shade and Mask (Black and White):
Press the MASK button to cover the upper and
lower, or left and right sides of the screen. By doing this, only a horizontal or vertical
slice of the screen shows on the display, which can help you concentrate on specific
items or lines of text. A mask displays two black bars horizontally or vertically on the
screen. The shade displays two translucent bars on the screen. Shading allows you
to see enough of the blocked area so that you can reference your place on the
screen. Use the WIDTH and UP/DOWN buttons to adjust the visible area and position
on the screen. Remove the button cover on the front of the remote control to access
these buttons.