RND 305-00019
2
ENGLISH
Introduction
The RND 305-00019 is a Switch Mode Batt ery Charger with MCU controlled charging. Maximum charge is
achieved through 4 stage charging (Precondition, Bulk, Absorption and Float charge stages). This
charger is suitable for 5AH-120AH 12V lead acid batt eries including GEL and AGM. Another excellent
feature is a sealed splash and dust proof IP-55 rated polycarbonate casing.
!Please read this manual carefully and follow the instructions!
Features
1. 4 Stage Smart Batt ery Charger.
A.
Pre charge – Batt ery analysis.
B.
Bulk - Constant Current charge.
C.
Absorption – Constant Voltage Pulse charge.
D.
Float – Maintenance charge.
2. Motorcycle, Car, and Low Temperature (< 10°C) charge modes.
3. Easy one butt on charge selection.
4. Can be permanently connected to the batt ery.
5. Electronic Output short circuit and reverse polarity protection.
6. Splash and dust proof IP-55 construction with poly-carbonate casing.
7. Over-Temperature Protection.
8. Smart batt ery charging is achieved with internal Microcomputer Unit (MCU). Condition of the
batt ery is analyzed before charging starts and is monitored constantly during charging.
Contents
• Smart Charger with lead connector
• Detachable leads with protection cover & crocodile clips
• Detachable leads with protection cover & ring terminals
