RMS Simba, Руководство пользователя

Страница: 11 / 20

FITTING OPTIONAL ACCESSORIES
ANKLESURE FOOT CONTROL DEVICES
Supplied with screws and fixings.
Tools Required: 4mm Hexagon Key and 8mm Spanner
The buggy footrest is pre-drilled to enable the fitting kit to be directly attached using
the screws, nuts and washers supplied.
The Anklesures should be attached to the bridges as shown below and adjusted to
suit the user. (Velcro style fastening shown). Further adjustments may be
necessary depending on the user’s growth or changes in foot-ware.
(ABDUCTOR)
Supplied with screws and fixings.
Tools Required: 5mm Hexagon Key and 10mm Spanner.
Locate the two pre-drilled mounting holes at the front of the seat panel.
Using the fixings supplied in the kit, attach the mount to the buggy seat and tighten
sufficient to prevent any movement.
To insert the abductor, depress the pop-pin and push downwards until the pin
locks at the bottom of the mount.
To remove the abductor, depress the pop-pin and lift clear.
Pop-pin
Front
Anklesure
bridges