RME Audio M-32 AD Pro Скачать руководство пользователя страница 8

Страница: 8 / 59

1. Rotate the encoder to highlight the "STATE" section

2. Rotate the encoder to highlight the "INPUT" section

3. Push the encoder to open the "INPUT" section.

2.2.2. Tabs

The

STATE

INPUT

and

OUTPUT

sections are further divided into

tabs

, which are shown when the

section is opened. Upon opening one of the four sections, a white cursor with a surrounding blue line is
shown to navigate between tabs and settings.

To close the section, move the cursor onto the minimize-icon

and confirm by pressing the encoder.

2.3. Status Indicator Color Chart

Notifications on this device have been optimized for different screen sizes. They are unified across the
device display and the web remote and feature a color bar that indicates the current state at a glance.

The following table shows the possible status indicator colors for reference.

Status

Color

Description

Warning

red

Requires a configuration change or matching
external signal.

Notice

yellow

There is a potential issue.

Notice (in progress)

yellow with dots

There is a temporary issue that should
resolve automatically.

No Routing

light green

In output section:

Output is sending an empty

signal.

Issues with Input

light green

On standby screen in output section:

Output is

working, but issues with input.

Good

green

Everything is working as expected.

Inactive

grey

Feature is not monitored or disabled.

RME M-32 AD Pro User’s Guide

2.3. Status Indicator Color Chart |

Содержание M-32 AD Pro




























































Результаты поиска

Содержание M-32 AD Pro

Отзывы:

Похожие инструкции для M-32 AD Pro

Бренды по названию

Популярные бренды

RME Audio M-32 AD Pro, Руководство пользователя

Результаты поиска

Содержание M-32 AD Pro

Отзывы:

Похожие инструкции для M-32 AD Pro

Бренды по названию

Популярные бренды