RME Audio HDSPe MADI Скачать руководство пользователя страница 10 | Manualshive

Страница: 10 / 72

background image

10

User's Guide HDSPe MADI

© RME

CE / FCC Compliance

CE

This device has been tested and found to comply with the limits of the European Council Direc-
tive on the approximation of the laws of the member states relating to electromagnetic compati-
bility according to RL2004/108/EG.

FCC

This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protec-
tion against harmful interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.

- Consult the dealer or an experienced radio/TV technician for help.

RoHS

This product has been soldered lead-free and fulfils the requirements of the RoHS directive.

ISO 9001

This product has been manufactured under ISO 9001 quality management. The manufacturer,
IMM Elektronik GmbH, is also certified for ISO 14001 (Environment) and ISO 13485 (medical
devices).

Note on Disposal

According to the guide line RL2002/96/EG (WEEE – Directive on Waste
Electrical and Electronic Equipment), valid for all european countries, this
product has to be recycled at the end of its lifetime.

In case a disposal of electronic waste is not possible, the recycling can
also be done by IMM Elektronik GmbH, the manufacturer of the HDSPe
MADI.

For this the device has to be sent

free to the door

to:

IMM Elektronik GmbH

Leipziger Straße 32

D-09648

Mittweida

Germany

Shipments not prepaid will be rejected and returned on the original sender's costs.

«
...
8
9
10
11
12
...
»

Содержание HDSPe MADI









































































Отзывы:

Нет отзывов

Похожие инструкции для HDSPe MADI

Бренд: GE Страницы: 20

Бренд: GE Страницы: 2

Бренд: D-2 Incorporated Страницы: 28

Бренд: D+H Страницы: 12

Бренд: Waters Страницы: 21

Бренд: Gamko Страницы: 32

Бренд: BAFANG Страницы: 4

Бренд: Napoleon Страницы: 4

Бренд: Oki Страницы: 4

Бренд: Dometic Страницы: 162

IMI SENSORS EX640B61

Бренд: PCB Piezotronics Страницы: 70

KARLSUDD TRAVEL BED

Бренд: Carena Страницы: 8

Wireless Charging Station Universal

Бренд: BMW Страницы: 160

Бренд: Klarstein Страницы: 24

Бренд: SpectraLink Страницы: 14

Бренд: Sierra Monitor Corporation Страницы: 1

01 29 9 416 497

Бренд: BMW Страницы: 5

Yepp Nexxt Mini 12080101

Бренд: Thule Страницы: 8

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды