RME Audio HDSPe AIO Pro, Руководство пользователя

Страница: 63 / 84

User's Guide HDSPe AIO Pro
© RME
63
As each of the 16 hardware outputs can be routed to the record software, and none of these
hardware inputs get lost, TotalMix offers an overall flexibility and performance not rivalled by any
other solution.
The risk of feedbacks, a basic problem of loopback methods, is low, because the feedback can
not happen within the mixer, only when the audio software is switched into monitoring mode.
The block diagram shows how the software's input signal is played back, and fed back from the
Hardware Output to the software input.
Recording a Software's playback
In real world application, recording a software's output with another software will show the follow-
ing problem: The record software tries to open the same playback channel as the playback soft-
ware (already active), or the playback one has already opened the input channel which should
be used by the record software.
This problem can easily be solved. First make sure that all rules for proper multi-client operation
are met (not using the same record/playback channels in both programs). Then route the play-
back signal via TotalMix to a hardware output in the range of the record software, and activate
Loopback for recording.
Mixing several input signals into one record channel
In some cases it is useful to record several sources into only one track. For example when using
two microphones recording instruments and loudspeakers, TotalMix' Loopback mode saves an
external mixing desk. Simply route/mix the input signals to the same output (third row), then
redefine this output into a record channel via Loopback. This way any number of input channels
from different sources can be recorded into one single track.
22.7 MS Processing
The mid/side principle is a special positioning technique for mi-
crophones, which results in a mid signal on one channel and a
side signal on the other channel. These information can be trans-
formed back into a stereo signal quite easily. The process sends
the monaural mid channel to left and right, the side channel too,
but phase inverted (180°) to the right channel. For a better under-
standing: the mid channel represents the function L+R, while the
side channel represents L-R.
During record the monitoring needs to be done in 'conventional' stereo. Therefore TotalMix also
offers the functionality of a M/S-decoder. Activation is done in the Settings panel of the Hard-
ware Input and Software Playback channels via the
MS Proc button.
The M/S-Processing automatically operates as M/S encoder or decoder, depending on the
source signal format. When processing a usual stereo signal, all monaural information will be
shifted into the left channel, all stereo information into the right channel. Thus the stereo signal is
M/S encoded. This yields some interesting insights into the mono/stereo contents of modern
music productions. Additionally some very interesting methods of manipulating the stereo base
and generating stereo effects come up, as it is then very easy to process the side channel with
Low Cut, Expander, Compressor or Delay.
The most basic application is the manipulation of the stereo width: a change of the level of the
side channel allows to manipulate the stereo width from mono to stereo up to extended.