RME Audio Hammerfall HDSPe MADIface, Руководство пользователя

Страница: 29 / 71

User's Guide HDSPe MADIface
© RME
29
19. Configuring the MADIface
19.1 Settings Dialog
Configuring the MADIface is done via its own settings dialog. The panel 'Settings' can be
opened by clicking on the hammer icon in the dock. The mixer of the MADIface, TotalMix, can
be opened by clicking on the mixer icon in the dock.
The HDSP’s hardware offers a number of helpful, well thought-of practical functions and options
which affect how the card operates - it can be configured to suit many different requirements.
The following is available in the 'Settings' dialog:
•
Configuration of digital I/Os
•
Synchronization behavior
•
State of input and output
•
Current sample rate
Any changes performed in the Set-
tings dialog are applied immedi-
ately - confirmation (e.g. by exiting
the dialog) is not required. How-
ever, settings should not be
changed during playback or record
if it can be avoided, as this can
cause unwanted noises.
The status displays at the bottom of
the dialog box give the user precise
information about the current status
of the system, and the status of all
digital signals.
MADI Out
Defines the format of the MADI output signal. MADI can be a 56 or 64 channel signal.
96 kHz
Sample rates higher than 48 kHz can be transmitted using the normal 48K Frame, or using a
native 96K Frame at the card's output.
Clock Mode
The unit can be configured to use its internal clock source (Master), or the MADI input signal
(AutoSync).
System Clock
Shows the current clock state of the HDSPe system. The system is either Master (using its own
clock) or Slave.
Input Status
Displays the state of the current input signal:
•
Channel format (64 or 56 channels)
•
Frame format (48K or 96K)
•
Sample rate (measured)
•
SyncCheck (No Lock, Lock, Sync)
SyncCheck
provides an easy to use check and display of the current clock status. It indicates
whether there is a valid signal (Lock), or if there is a valid and synchronous signal (Sync) at the
MADI input.