RME Audio Fireface 400 Скачать руководство пользователя страница 11 | Manualshive

Страница: 11 / 100

RME Audio Fireface 400 Скачать руководство пользователя страница 11

User's Guide Fireface 400

© RME

11

CE / FCC Compliance

CE

This device has been tested and found to comply with the limits of the European Council Direc-
tive on the approximation of the laws of the member states relating to electromagnetic compati-
bility according to RL89/336/EWG and RL73/23/EWG.

FCC Compliance Statement

Certified to comply with the limits for a Class B computing device according to subpart J or part
15 of FCC rules. See instructions if interference to radio reception is suspected.

FCC Warning

This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protec-
tion against harmful interference in a residential installation.

This device complies with part 15 of FCC rules. Operation is subject to the following two condi-
tions:

1. This device may not cause harmful interference
2. This device must accept any interference received, including interference that may cause

undesired operation.

However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be de-
termined by turning the equipment off and on, the user is encouraged to try to correct the inter-
ference by one or more of the following measures:

•

Reorient or relocate the receiving antenna

•

Increase the seperation between the equipment and receiver

•

Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected

•

Consult the dealer or an experienced radio/TV technician for help.

In order for an installation of this product to maintain compliance with the limits for a Class B
device, shielded cables must be used for the connection of any devices external to this product.

Note on Disposal

According to the guide line RL2002/96/EG (WEEE – Directive on Waste
Electrical and Electronic Equipment), valid for all european countries, this
product has to be recycled at the end of its lifetime.

In case a disposal of electronic waste is not possible, the recycling can also
be done by IMM Elektronik GmbH, the manufacturer of the Micstasy.

For this the device has to be sent

free to the door

to:

IMM Elektronik GmbH

Leipziger Straße 32

D-09648

Mittweida

Germany

Shipments not prepaid will be rejected and returned on the original sender's costs.

«
...
9
10
11
12
13
...
»

Содержание Fireface 400





































































































Отзывы:

Нет отзывов