background image

 

 

User's Guide AO4S-192 AIO

6

 

 

Reference 

0 dBFS @ 

Headroom 

Hi Gain 

+19 dBu 

15 dB 

+4 dBu 

+13 dBu 

9 dB 

-10 dBV 

+2 dBV 

12 dB 

 

With +4 dBu selected, the according headroom is 9 dB. At -10 dBV 12 to 15 dB headroom are 
common practice, each mixing desk operating at -10 dBV is able to send and receive much 
higher levels. Lo Gain allows to work with high levels, best suited for professional users who 
prefer to work balanced and at highest levels. 
 
The above levels are also found in our ADI-8 series of AD/DA converters, the Multiface, and 
even our Mic-Preamps QuadMic and OctaMic. Therefore all RME devices are fully compatible 
to each other. 

 

 

9. Warranty

 

 
Each individual AO4S-192 AIO undergoes comprehensive quality control and a complete test in 
a PC environment at IMM before shipping. The usage of high grade components allows us to 
offer a full two year warranty. We accept a copy of the sales receipt as valid warranty legitima-
tion. 
 
If you suspect that your card is faulty, please contact your local retailer. The warranty does not 
cover damage caused by improper installation or maltreatment - replacement or repair in such 
cases can only be carried out at the owner’s expense. 
 
RME does not accept claims for damages of any kind, especially consequential damage. Liabil-
ity is limited to the value of the AO4S-192 AIO. The general terms of business drawn up by Au-
dio AG applies at all times. 
 
 

10. Appendix

 

 
RME news, driver updates and further product information are available on our website: 
 
http://www.rme-audio.com 
 
Distributor: Audio AG, Am Pfanderling 60, D-85778 Haimhausen, Tel.: (49) 08133 / 91810 
 
Manufacturer: 
IMM Elektronik GmbH, Leipziger Strasse 32, D-09648 Mittweida 
 
 
 
 

Trademarks

 

 
All trademarks and registered trademarks belong to their respective owners. RME and Ham-
merfall are registered trademarks of RME Intelligent Audio Solutions. 
 
 

Copyright 

©

  Matthias Carstens, 3/2009. Version 1.0 

 
Although the contents of this User’s Guide have been thoroughly checked for errors, RME can not guarantee that it is 
correct throughout. RME does not accept responsibility for any misleading or incorrect information within this guide. 
Lending or copying any part of the guide or the RME drivers CD, or any commercial exploitation of these media without 
express written permission from RME Intelligent Audio Solutions is prohibited. RME reserves the right to change specifi-
cations at any time without notice. 

 

Содержание AO4S-192 AIO








Отзывы: