manualshive.com logo in svg

RME Audio ADI-648, Руководство пользователя

Поделиться
Скачать
RME Audio ADI-648 Скачать руководство пользователя страница 26

 

 

26

 

User's Guide ADI-648   © RME

 

 

Table 2 

 

1st Byte bit 0 

input 1 audio indication 

1st Byte bit 1 

input 2 audio indication 

1st Byte bit 2 

input 3 audio indication 

1st Byte bit 3 

input 4 audio indication 

 

 

2nd Byte bit 0 

input 5 audio indication 

2nd Byte bit 1 

input 6 audio indication 

2nd Byte bit 2 

input 7 audio indication 

2nd Byte bit 3 

input 8 audio indication 

 
 

Table 3 

 

bits 0..2 

ADAT in 1 / 3 / 5 / 7, 0 = error, 1 = lock, 2 = sync 

bits 4..6 

ADAT in 2 / 4 / 6 / 8, 0 = error, 1 = lock, 2 = sync 

 

 

16. Warranty

 

 
Before shipping each ADI-648 is tested by RME in a complete test sequence. Using only the 
best hi-grade components allows us to offer two years of warranty. The copy of the sales re-
ceipt or the Bill of Sale is your warranty legitimation. 
 
In case of any error or defect please contact your local dealer. The warranty does not cover 
damage due to abuse, incorrect installation or incorrect handling. 
 
RME’s liability is limited to the repair or the replacement of the product, and does in no way 
include the liability for incidental or consequential damages resulting from using the ADI-648. 
 
 

17. Appendix

 

 
RME news and further information can be found on our website: http://www.rme-audio.com 
 
Distributor: Synthax Audio AG, Am Pfanderling 62, D-85778 Haimhausen, Tel.: (49) 08133 / 
91810 
 

Trademarks

 

All trademarks and registered trademarks belong to their respective owners. RME, SyncAlign, 
DIGI96, Hammerfall and SyncCheck are registered trademarks of RME Intelligent Audio Solu-
tions. Intelligent Clock Control (ICC) and SteadyClock are trademarks of RME Intelligent Audio 
Solutions. Alesis and ADAT are registered trademarks of Alesis Corp. ADAT optical is a trade-
mark of Alesis Corp. S/MUX is copyright Sonorus. 
 

Copyright 

 Matthias Carstens, 11/2003. Version 1.21 

 
All entries in this User´s Guide have been thoroughly checked, however no guarantee for correctness can be given. RME 
cannot be held responsible for any misleading or incorrect information provided throughout this manual. Lending or copying 
any part or the complete manual or its contents as well as the software belonging to it is only possible with the written per-
mission from RME. RME reserves the right to change specifications at any time without notice. 

Содержание ADI-648




























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды