RM Gastro S-200 ABT, Инструкция по эксплуатации, Страница: 10 / 55

Pag. 5
UK
2.4 CONNECTION TO THE DRAIN LINE
The tank empties by gravity, so the drain needs to be
situated below the base of the machine.
The drain pipe needs to be connected to a drain- trap built
into the floor.
The drain dimensions are shown in the installation drawing.
2.5 DIFFERENT SETTINGS
Access technical settings “main menu”.
Proceed as described
(fig. 1)
- Open door or hood.
- Keep push buttons 2 and 3 (cycle selection and start) simultaneously pressed for 5 seconds.
- Then press push button 1 (machine ON/OFF) several times to select the items in the
following sequence. Parameters can be enabled or modified by pressing push buttons 2 and
3.
- To quit and store new settings, simply keep push button 1 pressed for a few seconds.
LANGUAGE : Select the desired language
THERMOSTOP : Thermostop function disable
ENERGY SAVING : Energy Saving function enable.
PREHEATING : Machine quick pre-heating enable.
DETERGENT PUMP : Detergent pump continuous enable. Detergent pump can be loaded
by simply keeping push button 3 pressed. It is recommended to load detergent before
suction pipe is filled up.
RINSE AID PUMP : Rinse aid pump continuous enable. Rinse aid pump can be loaded by
simply keeping push button 3 pressed. It is recommended to load rinse aid before suction
pipe is filled up.
Specification
French degrees
German degrees
English degrees
Parts per million
Maximum
Hardness
Residual
Minerals
f
°dH
°e
ppm
mg/l
From
5
4
5
70
To
10
7,5
9,5
140
300/400
Pag. 5
GB
2.4 CONNECTION TO THE DRAIN LINE
The tank empties by gravity, so the drain needs to be
situated below the base of the machine.
The drain pipe needs to be connected to a drain- trap built
into the floor.
The drain dimensions are shown in the installation drawing.
2.5 DIFFERENT SETTINGS
Access technical settings “main menu”.
Proceed as described
(fig. 1)
- Open door or hood.
- Keep push buttons 2 and 3 (cycle selection and start) simultaneously pressed for 5 seconds.
- Then press push button 1 (machine ON/OFF) several times to select the items in the
following sequence. Parameters can be enabled or modified by pressing push buttons 2 and
3.
- To quit and store new settings, simply keep push button 1 pressed for a few seconds.
LANGUAGE : Select the desired language
THERMOSTOP : Thermostop function disable
ENERGY SAVING : Energy Saving function enable.
PREHEATING : Machine quick pre-heating enable.
DETERGENT PUMP : Detergent pump continuous enable. Detergent pump can be loaded
by simply keeping push button 3 pressed. It is recommended to load detergent before
suction pipe is filled up.
RINSE AID PUMP : Rinse aid pump continuous enable. Rinse aid pump can be loaded by
simply keeping push button 3 pressed. It is recommended to load rinse aid before suction
pipe is filled up.
Specification
French degrees
German degrees
English degrees
Parts per million
Maximum
Hardness
Residual
Minerals
f
°dH
°e
ppm
mg/l
From
5
4
5
70
To
10
7,5
9,5
140
300/400