The VGA / HDMI connection cables should be run along the floor to a nearby table,
along with a 13amp extension cable that should be plugged into one of the sockets
within the AV Control System alcove. Where possible, a two-way extension lead
should be used as a minimum to give customers the option of plugging in extra
devices
ONCE IN POSITION ALL CABLES SHOULD BE SAFELY SECURED WITH
GAFFA TAPE TO MINIMISE TRIP HAZARDS
Typical positioning of VGA connection port on laptop
Once VGA cable is connected to laptop, after a brief pause the onscreen image
should then appear on the projection screen
