RKI Instruments 65-2427-05-01, Руководство оператора

Страница: 18 / 18

18 • 65-2427-05-01 H
2
S Detector
NOTE: If you do not allow the gas reading to decrease below the alarm points, then unwanted
alarms may occur.
2. Verify that the controller display reading decreases and stabilizes at 0 ppm H
2
S.
3. Store the components of the calibration kit in a safe and convenient place.
Parts List
Table 5 lists replacement parts and accessories for the H
2
S detector.
Table 3: Parts List
Part Number Description
06-1248RK Sample tubing (order by the foot)
07-0033RK Detector housing cap gasket
07-0203RK Rubber retaining boot
14-2101RK Spacer between sensor and rubber boot
18-0400RK-01 Junction box with rubber spacers
65-2039RK H
2
S replacement sensor
65-2427-05-01 H
2
S detector/j-box, CSA classified
65-2428-01 H
2
S detector (with plug-in sensor)
71-0454
65-2427-05-01 H
2
S Detector Operator’s Manual
(this document)
81-0064RK-04 Calibration cylinder, 25 ppm H
2
S in nitrogen, 34 liter aluminum
81-0076RK Zero air calibration cylinder, 17 liter
81-0076RK-01 Zero air calibration cylinder, 34 liter steel
81-0076RK-03 Zero air calibration cylinder, 103 liter
81-0151RK-02 Calibration cylinder, 25 ppm H
2
S in nitrogen, 58 liter
81-1050RK Regulator with gauge and knob, 0.5 LPM, for 17 liter and 34 liter steel calibra
-
tion cylinders (cylinders with external threads)
81-1051RK Regulator with gauge and knob, 0.5 LPM, for 34 liter aluminum, 58 liter, and
103 liter calibration cylinders (cylinders with internal threads)
81-1117RK Calibration cup