IMS01N09-E4
2
1. OUTLINE
The X-TIO-G (temperature control module for PROFIBUS) can
send/receive data to/from PROFIBUS compatible programmable
controllers (PLC) via PROFIBUS.
One X-TIO-G module enables temperature control corresponding
to two channels. It has power supply and communication terminals
in addition to temperature control input and output terminals.
All data are set by communication.
For details, refer to the
Module Type Controller SRX
PROFIBUS Communication Instruction Manual
(IMS01N10-E
)
and
the
Module Type Controller SRX
Communication Instruction Manual (IMS01N01-E
)
.
Control output
Measured
input
Power supply input
(24 V DC)
Usable modules:
Temperature control module
[Basic type]:
X-TIO-A
Temperature control module
[Extension type]:
X-TIO-B
Digital input module: X-DI-A/B
Digital output module: X-DO-A/B
(Up to 29 modules)
PROFIBUS-DP
Temperature control
module for PROFIBUS
X-TIO-G
Programmable
controller (PLC)
2. PRODUCT CHECK
Before using this product, check each of the following:
Model code
Check that all of the accessories delivered are complete.
Check that there are no scratch or breakage in external
appearance (case, front panel, or terminal, etc).
X-TIO-G-
-
/ Y
(1) (2) (3) (4) (5) (6) (7) (8)
(1) Type
G: Module for PROFIBUS
(2) Input channel 1, (3) Input channel 2
K: TC K
J: TC J
T: TC T
S: TC S
R: TC R
A: TC PL
Ⅱ
N: TC N
E: TC E
W: TC W5Re/W26Re
B: TC B
D: RTD Pt100
P: RTD JPt100
1: 0 to 10 mV DC
2: 0 to 100 mV DC
3: 0 to 1 V DC
4: 0 to 5 V DC
5: 0 to 10 V DC
6: 1 to 5 V DC
7: 0 to 20 mA DC
8: 4 to 20 mA DC
(4) Control output 1, (5) Control output 2
M: Relay contact output
V: Voltage pulse output 0/12 V DC
4: 0 to 5 V DC
5 0 to 10 V DC
6: 1 to 5 V DC
7: 0 to 20 mA DC
8: 4 to 20 mA DC
(6) CT1 input, (7) CT2 input
N: None
P: CTL-6-P-N
S: CTL-12-S56-10L-N
(8) Version symbol
No code: For Japanese domestic market
/Y: For
International
market
Heater break alarm (HBA) function can not be used
when control output is Voltage/Current output.
If any of the products are missing, damaged, or if your
manual is incomplete, please contact RKC sales office or
the agent.
The manuals can be downloaded from the official RKC
website:
http://www.rkcinst.com/english/manual_load.htm.
3. PARTS DESCRIPTION
Terminal cover
Indication lamps 1
Address setting
switch 1
Terminal cover
Joint connector
(Right-side)
Joint connector
(Left-side)
Indication lamps 2
Address setting
switch 2
PROFIBUS
connector
(COM.PORT)
PROFIBUS side Temperature control side
5
4
3
2
1
0
9 8 7
6
5
5
4
3
2
1
0
9 8 7
6
5
FAIL /RUN
RX/TX
EVENT1
EVENT2
EVENT3
EVENT4
9
8
7
C
B
A
6
5
4
3
2
1
0
F E
D
9 8
7
C
B
A
6
5
4
3
2
1
0
F E D
FA
I
L
RU
N
ON
L
TX
/R
X
FAIL/RUN
RX/TX
EVENT1
EVENT2
EVENT3
EVENT4
FA
IL
RU
N
ON
L
TX
/R
X
[Indication lamps 1]
FAIL/RUN (for temperature control side)
When normally:
A green lamp turns on (RUN)
When abnormally: A red lamp turns on (FAIL)
RX/TX (for RKC communication/Modbus)
During data send and receive: A green lamp turns on
EVENT 1 to 4
Display various states by setting.
During ON state: A green lamp turns on
Display contents
Event 1 state, Event 2 state, Comprehensive event state, Output state,
Control state, Executing segment state, Time signal state
[Indication lamps 2]
FAIL (for PROFIBUS side)
When hardware is normal:
A red lamp turns off
When hardware is abnormal:
A red lamp turns on
RUN (for internal communication)
When normally:
A green lamp turns on
When abnormally: A green lamp is flashing
ONL
During PROFIBUS connection establishment:
A green lamp turns on
RX/TX (for PROFIBUS communication)
During data send and receive: A green lamp turns on
4. COMMUNICATION SETTING
Set communication setting before mounting and wiring of SRX.
Do not separate the module mainframe from the terminal base
with the power turned on. If so, instrument failure may result.
Accessories
End Plate .......................................................................... 2
Joint connector cover ....................................................... 2
X-TIO-G Instruction Manual (IMS01N09-E4) ................... 1
GSD file (download free) * ................................................ 1
* The GSD file can be downloaded from the official RKC website:
http://www.rkcinst.com/english/download/field_network.htm.
*
Indication
lamps 2
Indication
lamps 1
CAUTION
Temperature control side
PROFIBUS side
