IMS01P04-E4
4
3. PARTS DESCRIPTION
Terminal cover
Indication lamps 1
Address setting
switch 1
Terminal cover
Indication lamps 2
Modular connector
COM. PORT1
Modular connector
COM. PORT2
Modular connector
COM. PORT3
5
4
3
2
1
0
9 8 7
6
5
5
4
3
2
1
0
9 8 7
6
5
FAIL/RUN
RX/TX
EVENT1
EVENT2
EVENT3
EVENT4
Event
input/output
connector
*
PLC/host communication side Temperature control side
FAIL/RUN
RX/TX
EVENT1
EVENT2
EVENT3
EVENT4
[Indication lamps 1]
FAIL/RUN (for temperature control)
When normally:
A green lamp turns on (RUN)
When abnormally:
A red lamp turns on (FAIL)
During self-diagnostic error: A green lamp flashes
RX/TX (for internal communication)
During data send and receive: A green lamp turns on
EVENT 1 to 4
Display various states by setting.
Display contents:
Event 1 state, Event 2 state, Comprehensive event state, Output
state, Control state
[Indication lamps 2]
FAIL (for PLC/host communication)
When normally:
A red lamp turns off
When abnormally:
A red lamp turns on
Communication environment setting mode by the switch:
A red lamp flashes
RUN (for PLC/host communication)
When normally:
A green lamp turns on
When abnormally:
A green lamp turns off
Memory backup error:
A green lamp flashes slowly
Module configuration error: A green lamp flashes slowly
PLC communication error: A green lamp flashes slowly
Data collection just after the power is turned on:
A green lamp flashes rapidly
COM. PORT1
During data send and receive: A yellow lamp turns on
COM. PORT2/ COM. PORT3
During data send and receive: A yellow lamp turns on
4. COMMUNICATION SETTING
Set communication setting before mounting and wiring of SRV.
Do not separate the module mainframe from the terminal
base with the power turned on. If separated, adjusted data
may be destroyed; control be stopped, and no return can be
made.
Setting at using PLC communication
Address setting switch 1 (front) [See P. 5]
Set an address of module.
Address setting switch 2 (left side) [See P. 5]
Set the unit address for PLC communication.
PLC communication setting switch (left side) [See P. 5]
Set the communication speed, data bit configuration, and
protocol for PLC communication. Set the same value as
communication settings of PLC.
In addition, select the communication port of modular
connector.
Internal communication setting switch (right side) [See P. 6]
Use this module without changing the factory set values.
Setting at using host communication 1
Address setting switch 1 (front) [See P. 5]
Set an address of module.
Address setting switch 2 (left side) [See P. 5]
Set the unit address for host communication 1.
PLC communication setting switch (left side) [See P. 5]
Select the communication port of modular connector.
Host communication setting switch (left side) [See P. 6]
Set the communication speed, data bit configuration, and
protocol for host communication 1. Set the same value as
communication settings of host computer.
Internal communication setting switch (right side) [See P. 6]
Use this module without changing the factory set values.
Setting at using host communication 2
Address setting switch 1 (front) [See P. 5]
Set an address of module.
Address setting switch 2 (left side) [See P. 5]
Set the unit address for host communication 2.
PLC communication setting switch (left side) [See P. 5]
Set the communication speed, data bit configuration, and
protocol for host communication 2. Set the same value as
communication settings of host computer.
In addition, select the communication port of modular
connector.
Internal communication setting switch (right side) [See P. 6]
Use this module without changing the factory set values.
5
4
3
2
1
0
9 8 7
6
5
5
4
3
2
1
0
9 8 7
6
5
FAIL/RUN
RX/TX
EVENT1
EVENT2
EVENT3
EVENT4
Internal communication
setting switch
PLC communication setting switch
Host communication setting switch
Address setting switch 2
Address setting switch 1
Left side
Right side
Front
Module mainframe
Terminal base
*
Installed when provided with the event input/output (optional).
Indication
lamp 2
Indication
lamp 1
Temperature control side
PLC/host communication side
FAIL
RUN
COM. PROT1
COM. PROT2/COM. PROT3
CAUTION
